iv Sun Ultra 20 M2 Workstation Service Manual • January 2007
4. Running Diagnostics 4–1
4.1 Understanding the Diagnostic Partition 4–2
4.2 Starting Pc-Check Diagnostics 4–2
4.3 System Information Menu 4–3
4.4 Advanced Diagnostics 4–4
4.4.1 Hard Disk Drive Testing 4–6
4.5 Immediate Burn-In Testing 4–8
4.6 Deferred Burn-In Testing 4–10
4.7 Create Diagnostic Partition 4–11
4.7.1 Adding a Diagnostic Partition to the First Bootable Disk 4–11
4.7.2 Creating a Log File on the Diagnostic Partition 4–12
4.7.3 Accessing the Diagnostic Partition Under Red Hat Linux 4–13
4.7.4 Accessing the Diagnostic Partition Under the
Solaris 10 Operating System 4–14
4.7.5 Accessing the Diagnostic Partition Under Windows XP 4–16
4.8 Show Results Summary 4–17
4.9 Print Results Report 4–18
4.10 About Pc-Check 4–18
4.11 Exit to DOS 4–18
5. Maintaining the Workstation 5–1
5.1 Electrostatic Discharge (ESD) Precautions 5–2
5.2 Opening the Workstation 5–2
5.2.1 Tools and Supplies Needed 5–2
5.2.2 Powering Off the System and Removing the Left Side Access
Panel 5–3
5.2.3 Removing the Front Bezel 5–4
5.3 Closing the Workstation 5–5
5.3.1 Postinstallation Instructions 5–5
5.3.2 Installing the Front Bezel 5–5
To Next Page
Loading...
