SUNWARD SWE50E - Lifting Operation

OPERATION & MAINTENANCE MANUAL SWE50E/SWE60E/SWE70E/SWE80E9/SWE100
110
3.10.16 Lifting operation
 Sling/chain should tightly bind the load
down, the workman should glove when
bind sling/chain.
 Connect sling/chain with bucket lifting
ring, curled bucket, and retracted arm.
 Before start, it should uniform the hand
signal with signalman.
 Acquaint with the positions of all
workmen in the range of working area.
 Connect hand rigging on the load and
ensure the people pulling hand rigging
away from load.
 Try to lift the load before normal
operation.
Warning
It must follow all safety regulations when the
machine lifts objects.
 Don’t use damaged chain, wire rope, or cord in
lifting work, or GBH may occur.
 Don’t move the load suddenly.
 Don’t move load on the top of human beings.
 Don’t permit everybody adjacent to the load.
 Ensure everybody away from lifted or
tightwire-tied and on the ground load, until the
chocks support the load or the load has been
stably placed on the ground.
 Fix superstructure, and make the traveling
motor on the rear.
 Don’t connect sling/chain on the bucket teeth.