SUNWARD SWE50E - Prevent Accidents During Slewing and Reversing

OPERATION & MAINTENANCE MANUAL SWE50E/SWE60E/SWE70E/SWE80E9/SWE100
31
1.3.8 Prevent accidents during slewing and
reversing
Warning: There is a possibility
to crush or hit person around to
cause severe accidents of injury or death,
when swing or reversing the machine.
Follow the following instructions to prevent
accidents during swing or reversing operation.：
 Check surrounding area to ensure there is no
other person around before swing and
reversing the machine.
 Ensure that bystanders are out of swing area.
 Ensure that travel alarm is functioning properly.
Be alert that no bystander accesses to jobsite.
Sound horn or use other alarm to warn people.
 When machine travels in reverse, provide a
flagman to assist in case operator’s sight is
limited. Keep the flagman with operator’s
sight
 When signal is needed during working, signal
man be suppose to use hand signal. Only when
the signals are understood by both signal man
and operator, the machine can be operated to
tram or swing.
 Understand all flags，signs and signals being
used during operation. Select the person who is
responsible to signal.
 Keep windows, mirrors and light fittings clean.
 In case of improper visibility arising from dust,
rain, or fog etc. use appropriate lighting device.
 Please read and understand all safety rules
described in this manual.