SUNWARD SWE50E - Keep Machine Clean; Pre-Start Inspection; Instruction of Entry into Cab

OPERATION & MAINTENANCE MANUAL SWE50E/SWE60E/SWE70E/SWE80E9/SWE100
18
1.2.6 Keep machine clean
 Do not use water or vapor to flush electrical
circuit, connector of machine to avoid electrical
system failure.
 Remove all mud, oil dirt and other foreign
matter. Keep machine clean at all times.
1.2.7 Pre-start inspection
 Inspect surrounding machine daily or before
each work shift.
Be sure to follow the instruction described in
“pre-start inspection” section during patrol
inspection process.
1.2.8 Instruction of entry into cab
 Remove all mud, oil adhered to your shoes
prior to access into cab. Failure to do so, your
foot may slip and this may cause serious
accidents.
 Do not leave parts or tools around operator’s
console.
 Do not store flammable and explosive items in
cab.
 Do not use radio or cell phone during operation
on the machine.
 After smoking, be sure to extinguish dog-end,
secure ash tray cover to prevent fire.
 Don’t place transparent bottle and other convex
stuff in cab to prevent fire as a result of solar
light focusing.
 Don’t leave lighter in cab. There is a possibility
that lighter may explode along with the increase
of temperature.