SUNWARD SWE50E - Avoid Runaway Accident; Machine Movement

OPERATION & MAINTENANCE MANUAL SWE50E/SWE60E/SWE70E/SWE80E9/SWE100
32
1.3.9 Avoid runaway accident
Warning: When the machine is out of
control, any attempt to mounting or to stop
a moving machine can result in severe injury
or even death.
To avert runaway, it’s necessary to park
machine properly.
 Always park the machine on level ground, do
not park the machine on a slope.
 Lower the bucket to the ground.
 Disable the auto-idle speed switch and power
selecting switch.
 Allow the engine to idle at low speed for 3
minutes to cool down the machine.
 Stop the engine, remove the key.
 Turn off the pilot control switch.
 When the machine is to park on a slope, chock
the machine on both side of the track, lower
bucket to dig the teeth into the ground.
 Position the machine to avoid unexpected
movement. Keep proper distance from the
other machine.
1.3.10 Machine movement
 Before moving the machine, check travel
control lever (pedal) to ensure the relationship
between operation direction and machine
movement direction.
 Before moving the machine, make sure the
working area is free of other persons and
obstacles, and sound the horn to alert.
 Bypass any obstacles during traveling.
 When traveling, swing, operating working
device in confined area, position a signal
person and define the meaning of the signals
beforehand.