SUNWARD SWE50E - Maintenance Information; Instruction of Maintenance and Inspection; Daily Inspection Prior to Start-Up

OPERATION & MAINTENANCE MANUAL SWE50E/SWE60E/SWE70E/SWE80E9/SWE100
122
4.1 Maintenance information
Study how to maintenance and service this
excavator, follow all maintenance and inspection
procedure described in this manual.
4.1.1 Instruction of maintenance and inspection
【Important】
 Use recommended fuel, hydraulic oil and
lubricant.
 Use only genuine parts produced by
SUNWARD.
 In the event that you fail to use
recommended fuel, lubricant, hydraulic
oil and genuine parts, your warranty
rights will become void.
 Do not adjust engine speed limiter or
hydraulic system safety valve.
 Do not allow water to reach electric
equipments.
 Do not dismantle engine pump controller,
sensor etc.
4.1.2 Daily inspection prior to start-up
 Check monitor.
 Check individual liquid level.
 Check hose and piping for leakage, twist, wear
out or damage.
 Give a walk-around inspection for some normal
items, e.g. noise, temperature etc.
 Check parts for looseness or lost.
 If any problems are found, repair them before
operation, or you may contact designated
distributor for assistance.