SUNWARD SWE50E - Safe Operation Instruction; Checks before Starting Engine

OPERATION & MAINTENANCE MANUAL SWE50E/SWE60E/SWE70E/SWE80E9/SWE100
27
1.3 Safe operation instruction
1.3.1 Checks before starting engine
Before starting daily routine inspection, carry
out the following checks.
 Wipe off dust on glass window to secure visual
field.
 Wipe off dust on the surface of front light and
working lamp, check to ensure they are
properly functioning.
 Check coolant level, fuel level and oil level in
engine oil pan. Check air filter for clogging,
check wiring for damage.
 Adjust operator’s seat to a position where it is
easy to carry out operation. Check seat belt or
mounting clamps for damage or wear.
 Check meters to ensure they are functioning
properly. Check working lamp angle. Make
sure control levers are at neutral position.
 Check safe lock control levers to ensure they
are in LOCK (UP) position before starting
engine.
 Adjust rear view mirror to a certain position
where a clear visual field of back machine is
secured.
 Check upper or lower machine to ensure there
is no other persons or obstacles surrounding
machine.
 In case there are any warning tags posted on
control lever, do not start or reach control
lever.