SUNWARD SWE50E - Fire Prevention; Prevent Fly-Out or Falling Object; Prevent Fly-Out Parts

OPERATION & MAINTENANCE MANUAL SWE50E/SWE60E/SWE70E/SWE80E9/SWE100
24
1.2.22 Fire prevention
 Switch starting key to “OFF” position to stop
engine.
 Remove fire extinguisher in cab.
 Get out of machine by utilizing handrail and
steps.
 Contact fire department and colleagues and
superior. Extinguish fire with fire extinguisher.
1.2.23 Prevent fly-out or falling object
 Wear protection glasses or goggles to avoid
injury resulting from fly-out and falling object
(such as metal particles or sand rock).
 When hitting, make working area off-limits to
the other person.
 Machine must be fitted with falling object
protective structure (FOPS) and front
protective structure. If machine is used in
mining area or quarry where there is a risk of
falling rocks.
1.2.24 Prevent fly-out parts
 Bear in mind that lubricating grease in track
tensioner is under high pressure. Do not
remove parts such as oil cup or valve etc to
avoid injury.
 Moreover, keep face and body away from
valve block in case that part will fly out.
 There is some pressure build up in travel
redactor. Gear oil temperature will increase
after operation. Keep face and body away from
air bleeding plug.
 With gear oil cooled, gradually loosen air
bleeding plug to release pressure.