SUNWARD SWE50E - Prevent Scald; Stay Away from Power Driven Parts; Prevent Fire and Explosion

OPERATION & MAINTENANCE MANUAL SWE50E/SWE60E/SWE70E/SWE80E9/SWE100
23
1.2.19 Prevent scald
 Be cautious of coolant burn during inspection
or discharging coolant. Hot fluid or vapor can
erupt from check port or discharging port and
scald. Allow cool before opening.
 Before attempting any inspection or oil
discharging operations, wait to prevent scald
until oil is cool and internal pressure is
released.
1.2.20 Stay away from power driven parts
 Use extreme care to operate in vicinity of
driving parts to prevent hands, feet, hair and
clothing being caught in machine.
1.2.21 Prevent fire and explosion
 No smoke or using naked flame around fuel
and engine oil.
 Stop engine before refilling.
 Do not spill oil to hot surface or electrical
equipments of machine.
 Secure and lock oil cap after adding oil.
 Wipe off oil dirt; remove all flammable or
explosive material.
 Do not weld or cut pipelines that contain
flammable fluids.
 Keep wire terminals secured and clean.
 All leads must be free of damage. Prevent fire
due to short circuit of damaged leads and
machine.
 Prevent spark due to static electricity or
friction.