OPERATION & MAINTENANCE MANUAL SWE50E/SWE60E/SWE70E/SWE80E9/SWE100
4.4.13 Machine out of use for an extended period
If the machine will be out of use for more than one month, you should carry out following
protective steps to ensure the performance of machine won’t be suffered during storage period.
Protective steps for extended period storage
Clean machine body completely, repair any problem.
Add lubricant and grease
lubricant
Check whether lubricant is insufficient or dirty or not. Add
grease lubricant to lubrication demanded parts. Wipe lubricant
on the possible rusting parts.
Remove battery, charge sufficiently, then store.
Add antirust in the water, and add antifreeze if the cooling
water may be frozen; or exhaust cooling water, place the “no
water in radiator” label in cabin after water exhausted.
Dustproof and waterproof
work
Store the machine in dry garage and cover it.
Check and repair, and then store.
Lubrication operation—
Engine idle at low revs for a
few minutes
The parts will rust if the lubricant velum is demolished, causing
abnormal abrasion in next operation. In order to prevent this
happening, run the machine at least once every month to
lubricate parts. Meanwhile, check cooling water and lubricant
level.