SUNWARD SWE50E - Worksite Safety; Operation Around Loosened Area

OPERATION & MAINTENANCE MANUAL SWE50E/SWE60E/SWE70E/SWE80E9/SWE100
21
1.2.15 Worksite safety
 Thoroughly inspect worksite for any abnormal
danger situations prior to operation.
 Operate with extra care for any operation in
vicinity of flammable materials such as
thatched roof, dry leaves or dry grass.
 Survey terrain and ground condition around
worksite. Determine a safest operation method
in a safe manner.
 Do not operate in vicinity of the area in which
there is a risk of landslide or falling rock.
 At the work around place of water or gas lines,
or cables underground. Contact relevant utility
to identify their locations. Pay attention not to
rapture or damage any of these lines.
 Take necessary measures to prevent any
unauthorized person from entry into work area.
 In the event of operation over soft ground or in
shallow water, it’s necessary to check type and
condition of rock bed, and take water depth,
flow speed into account prior to operation.
 In the event of operation in vicinity of over
bridge or overhead stuff, be cautious not to
collide with front working device of machine.
1.2.16 Operation around loosened area
 Do not operate around cliff, shoulder of road or
ditch. In this area, the ground is loosened.
There is a possibility of getting into danger of
ground sinking with vibration and weight of
the machine. Bear in mind that the soil is
loosened in this area after heavy rain,
explosion operation or earthquake.
 When working on a dike or around ditch, there
is a possibility of getting into danger of ground
sinking resulting from vibration or weight of
the machine. It’s necessary to take measures to
secure safety against tip-over and falling off.