OPERATION & MAINTENANCE MANUAL SWE50E/SWE60E/SWE70E/SWE80E9/SWE100
2. Forbid travelling in inclined to prevent machine roll over.
3. Forbid swing on the slope.
4.After installing the heavy work equipment, machine swing flight will
increase.Therefore, misjudgment will-make-the machine will crash surrounding objects, and the
surrounding-objects should allow sufficient margin-whenoperation. In addition, natural subsiden
ce will increase (when the device stopped working in mid-air, under its own gravity, will graduall
y decline
5. After installing work attachment, work range will suddenly become larger, so it has the
dangerous of corrosion objects and misjudged distance. When operate work attachment, please
keep distance to any object in the area.
6.3 hydraulic quartering hammer
1、Different model of Excavator mounting with different model of hydraulic quartering
hammer, before mounting hydraulic quartering hammer, please consult Sunward to
comfirm the model.
6.3.1 Main use of hydraulic quartering hammer
a) Crush rock
b) Demolish buildings
c) Repair road
6.3.2 Hydraulic quartering hammer assembly
Sunward compact excavator standard collocation is breaking pipeline, including hydraulic
circuit, stop valve, they are located at two sides of arm, the end of pipeline is the quick joint
which is connect accessory, as the following figure
To Next Page
Loading...
