OPERATION & MAINTENANCE MANUAL SWE50E/SWE60E/SWE70E/SWE80E9/SWE100
4.5.3.2 Clean up cooler.
After the machine works a certain
period of time, the cooler surface will be
covered with dust or other foreign material
which will influence radiating effect of
cooler. It should be cleaned in time.
Open right side door of machine hood；
Loosen the mounting bots located on
left side of condenser, open up
condenser of A/C.
Use compressed air (below 0.2 MPa) or
water to rinse condenser.
Remove the strainer (if present) in front
of radiator for cleaning up.
Use compressed air (below 0.2 MPa) or
water to rinse cooler.
Reinstall the front strainer (if provided)
and condenser of A/C.
Note: Do not remove air conditioning
piping, failure to do so will cause coolant
leakage and lead to air conditioning
malfunction.
To Next Page
Loading...
