OPERATION & MAINTENANCE MANUAL SWE50E/SWE60E/SWE70E/SWE80E9/SWE100
（11）Traction hook
（12）Anti- scald label
After running operation, engine oil, gear oil
and hydraulic oil is getting hot, so do engine,
hoses, pipelines or other components. Be
cautious of scalding.
Attempt inspection and maintenance procedure,
after machine components and oil cool down.
There is pressure in existence in hydraulic oil
tank. Relieve pressure before opening cap to
avoid oil spurt.
There is pressure which builds up in hydraulic
piping. Relieve pressure prior to repair or
replacing.
（13）Prevent hand being caught in fan blade.
Fan would run at high speed while engine is
active. Pay much attention to prevent hand,
foot, hair and clothing being caught in fan
blade, when attempting any inspection and
maintenance procedures on machine.
To Next Page
Loading...
