OPERATION & MAINTENANCE MANUAL SWE50E/SWE60E/SWE70E/SWE80E9/SWE100
A/C Fault and Repair
electric appliance connector loosen causes
clutch abnormal
plug connector tightly or
repair
tighten it, if it wearout ,please
replace it
blower、fan blade of electric fan loosened
blower、electric fan running abnormal
bearing of compressor is destroyed
bearing of tension wheel is destroyed
Check whether short cut and
relpace
repair or replace
repair or replace
leak hunting,repair,charging
refrigerant
A/C switch/ manipulator fault
loosened or breakaged belt
compressor running is abnormal
the cold adjustment of A/C switch is
improper / manipulator refrigerating
capacity setting is too little
adjust again/enlarge
refrigerating capacity setting
the system has too much water, inside the
ice block
too much or lacking refrigerating fluid