Svantek SV 977D - Page 200

200
SV 977D User Manual - Appendixes
Table A.14. RPM parameters
Group name
#1
code
#7
code
#S
code
Code description
RPM Measurement
Xr
0 - switched Off
1 - switched On
RPM Pulse
Xp
n - n = Pulses/Revolution (1 ÷ 360)
RPM Unit
Xu
0 - rps
1 - rpm
Table A.15. Communication ports parameters
Group name
#1
code
#7
code
#S
code
Code description
Bluetooth
BT
0 - Off
1 - On
GPS Host Port
GH
0 - Off
1 - On
Table A.16. RS232 ports parameters
Group name
#1
code
#7
code
#S
code
Code description
Baud Rate
AQ
7 - 115200
6 - 57600
5 - 38400
4 - 19200
3 - 9600
2 - 4800
1 - 2400
0 - 1200
Time Out
BB
n - n = time in seconds (1  60)
Table A.17. GPS parameters
Group name
#1
code
#7
code
#S
code
Code description
Time Zone
TZ
x - number of minutes with step 15; x  (-
720  840)
GPS position (read only)
GP
#7,GP; This command returns the position of the
instrument from the GPS module in the format:
#7,GP,qq,YY,MM,DD,hh,mm,ss,LaD,LaM,LaS,
LaS10,Ladir,LoD,LoM,LoS,LoS10,Lodir;
where:
qq – Fix (qq>0), Not fix (qq=0),
YY – Year,
MM – month,