17.1 Replacing batteries 139
17.2 Memory card extraction and insertion 139
17.3 Transducers 139
17.4 Resetting instrument 141
17.5 Firmware upgrade 141
17.6 Preservation of internal batteries 141
17.7 Transportation and storage 141
17.8 Cleaning 142
17.9 Troubleshooting 142
18 GLOSSARY 143
18.1 Modes and Measurement Functions 143
18.2 Calibration 144
18.3 Measured results 146
18.4 Measurement parameters 148
18.5 Display parameters 163
18.6 Instrument parameters 168
18.7 Auxiliary parameters 175
APPENDIX A. REMOTE CONTROL 177
A.1. Function #1 – Input/Output of the control setting codes 177
A.2. Function #2 – Read out of the main measurement results 178
A.2.1. Read-out the profile results 178
A.2.2. Read-out the RT60 results 179
A.2.3. Read-out the STIPA results 180
A.3. Function #3 – Read out of the measurement results in 1/x Octave or FFT mode 181
A.4. Function #7 – Special control functions 182
A.5. Function #D – Read / Write the data files from the external memory (SD-card) 182
A.6. Function #R – Automatic results transmission during the measurement 184
A.7. Control setting codes 191
APPENDIX B. DATA FILE STRUCTURES (revision 2.08) 207
B.1. Description of blocks of parameters 207
B.2. Description of logger's data blocks 222
B.3. Description of cyclical results blocks (Summary Results) 228
B.4. Date and time (example decoding procedure) 237
APPENDIX C. TECHNICAL SPECIFICATIONS 238
C.1. Specification of SV 977D as Sound Level Meter (SLM) 238
C.1.1 Specification of SV 977D as SLM in the standard configuration 238
C.1.2 Effect of the SA 22 windscreen 260
C.1.3 Effect of the SA 277D outdoor microphone kit 274
C.1.4 Effect of Vibration 275
C.2. Specification of SV 977D as Vibration Level Meter (VLM) 276
To Next Page
Loading...
Need help?
General
