Max Speed
It sets the maximum embroidery speed
- Basic setting is 1000rpm and you can set it in the range of minimum to 1200rpm in the unit of 1rpm.
Min Speed
It sets the minimum embroidery speed.
- Basic setting is 300rpm and you can set it in the range of 300 to maximum rpm in the unit of 1rpm.
EMB Speed
It sets the embroidery speed.
- Basic setting is 800rpm and you can set it in the range of minimum and maximum rpm (set in the machine
parameter) in the unit of 1rpm.
Inching Speed
It sets the speed of the low-speed stitching at the start of the embroidery.
- Basic setting is 180rpm and you can set it in the range of 50~200rpm in the unit of 1rpm.
Jump Speed
It sets the limit of the jump stitching (the frame moves without stitching).
- Basic setting is 750rpm and you can set it in the range of minimum to maximum speed in the unit of 1rpm.
Slow Speed
It sets the embroidery speed during slow speed.
- Basic setting is 650rpm and You can set it in the range of minimum and maximum speed in the unit of 1rpm.
After Trimming Inching Stitch
It sets the number of low-speed stitching (inching) when the machine meets a color change signal during
embroidery or when the embroidery is completed for certain design.
- Basic setting is 3 stitches and you can set it in the range of 2-10 stitches in the unit of 1 stitch.
Auto Trimming
It sets whether or not to use the automatic trimming function.
- Basic setting is YES. Select NO to turn this function off.
Auto Color Change
It sets whether or not to use the automatic color change function.
- Basic setting is YES. Select NO to turn this function off.
Optimize Method
Gauge refers to making running stitches in parts off the design exclude by certain length. It sets the distance from
the exclude to the gauge.
- Basic setting is 10mm and you can set it in the range of 1~30mm.
S/W Limit Setting
It sets whether to use the virtual frame limit function.
- Basic setting is NO.
Thread Break Moving
The frame automatically moves to the back of the machine when the machine stops after detecting a thread break
for convenient threading of the upper thread. You can set the length of the frame movement.
- Basic setting is 0mm and you can set it in the range of 0~50mm in the unit of 1mm.
Lock Stitch
It repeats back-tack in order to prevent unraveling of thread during trimming.
- Basic setting is 1 stitch and you can set it in the range of 1-5 stitches in the unit of 1, 3, or 5 stitches.
To Next Page
Loading...
Need help?
General
