Introduction 2 FlexSet 120S/280S User Guide
Conventions
Conventions
• Fixed key names appear in a shaded distinctive box, for example .
• Soft key names appear in a clear distinctive box, for example [AutRdl].
• Emphasized text, as in
SPKR, indicates system defined fixed keys or Direct Station Selection (DSS) user
programmable keys (see figure on page 4).
• The scroll icon ( ) used in this document indicates features for which scroll lists are available, namely the [Next],
[Prev], [FastUp] and [FastDn] soft keys, and buttons.
• Text in italics refers the reader to another section of the guide or to other Coral system manuals, for example “See
Ring Adjustment”. It is also used for notes.
• The instruction “Select” indicates that the user should use Navigator keys: up/down, right/left navigator keys to find
and select an item from the display.
• The instruction “Enter” indicates that the user should press the ENTER key (above navigator keys) to initiate the
action.
• The instruction “Choose” indicates that the user should combine the Navigator right/left keys and “Enter” actions to
choose and actuate an option. Pressing an option’s soft key also chooses and activates the option.
• The instruction “scrolling,” or “scroll,” indicates that the user should press one of the four navigator keys
• Two FlexSet models are described in this manual: the FlexSet 120S, with a 3-soft key display, and the FlexSet 280S,
with a 5-soft key display. The displays of both models are illustrated in the manual, with the 5-soft key display on the
left and the 3-soft key display on the right. Where a list, menu or sub-menu continues through several lines, these are
indicated as Page 1, Page 2, etc.
To Next Page
Loading...
