Station Features 135 FlexSet 120S/280S User Guide
Park
Park
During a call, use Park to place the second party on hold at your station so that it can be picked-up at another station.
The [Park] soft key is shown with a bullet next to it, indicating that a call has been parked at your station. The parked
party hears music or a tone (system-defined).
Press [Park] to Park a call, or to retrieve from Park.
10:50 26 May 2004 site name
user name station number
CampOn Park V-Page WhspPg SltMon
10:50 26 May 2004 site name
user name station
PickUp CampOn Park
Page 1
CALL PARK Name
CALL PARK Name
Page 2
Parking a Call:
Press [Park] while on a call.
The call goes into Park and the
LOOP line flashes at your station. Your station is free to make other calls.
To Next Page
Loading...
