Tadiran Telecom FlexSet 280S - Attendant: Call Forward

Attendant Features 186 FlexSet 120S/280S User Guide
Attendant: Call Forward
Attendant: Call Forward
The attendant may program stations, boss groups and ACD/UCD groups so that incoming calls ring at various
destinations, depending on the state of the terminal (all, busy, no answer, timed).
These features can also be operated directly from a user station when defined by the COS, without attendant
involvement.
Calls incoming from an external source only can be forwarded using the [All-E], [Busy-E], [NoAn-E], and [Time-E] soft keys.
Additionally, calls from Internal and External sources can be forwarded to different destinations, as described in
Internal/External Call Forwarding on page 69.
Possible destinations are operator, station/group, external number via public and private speed call library, DVMS
pre-recorded message, UNA/central bell, group call, or network number (and the station itself for external calls).
Attendant Call Forwarding options are accessed by pressing [aFwd] from idle state.
10:50 26 May 2004 site name
user name station number

BG:Fwd aFwd Charge St.Set Tk.Set
10:50 26 May 2004 site name
user name station

aFwd Charge St.Set
Page 1
A
ttendant: Call Forward
E=External

A
ll All-E Busy Busy-E NoAns
A
ttendant: Call Forward
E=External

A
ll All-E Busy
Page 2