Station Features 101 FlexSet 120S/280S User Guide
Group Calls: Submitting Request to Speak
Group Calls: Submitting Request to Speak
Members may be permitted to participate in a Group Call with the ability to speak and hear each other, or in the mute
mode. In case of a muted conference only a Group Call initiator has the right to speak. The user defined as Group
Operator can set his own station to the audible mode, while connected to the conference, and may grant the right to
speak to other participants.
This feature allows you to request permission to speak from the Group Operator. The request is submitted while your
current conference is in progress, without disturbing it.
Sending a request to speak to the group operator:
1. Press the
Speech Request DSS key or [Xfer]. (To program a Speech Request key, use Help feature access code
#1443, followed by the Group Operator dial number)
2. Continue attending the current conference, while watching the
Speech Request key LED and the second line of
the display.
3. The TRX. ON message indicates that you are given permission to speak.
4. The TRX. OFF message indicates that the permission to speak is taken away from you.
To Next Page
Loading...
