Tadiran Telecom FlexSet 280S - Messages: Options

Station Features 116 FlexSet 120S/280S User Guide
Messages: Options
Messages: Options
You can leave a message at another station and conversely, any station can leave a message at your station.
Press [Msg] to access the message options.
10:50 26 May 2004 site name
user name station number

Msg CALLog Fwd DND Music
10:50 26 May 2004 site name
user name station

Msg CALLog Fwd
Page 1
Message Options

Msg
.
MsgCan Msg-Wt
Message Options

Msg
.
MsgCan Msg-Wt
Page 2
[Msg.] Leave Message is used to leave a message at another station, or to access messages left at your station.
Viewing and answering messages left at your station:
1. The message lamp flashes and a bullet appears next to the [Msg] and [Msg.] keys when there is a
message waiting. The message consists of simple text, such as CALL SUSAN, or CALL VOICE
MAIL, which is displayed on the top line.
2. Choose one of the following options after pressing [Msg.]:
[Prev] To view the previous message. If there is no previous message, LIST START appears on
the top line of the display.
[Next] To view the next message. If there are no other messages, then LIST END appears on
the top line of the display.
[Call] To call back the message sender. The message lamp is turned off if there are no other
messages. (To call the Voice Mail, see page 119)
[LveMsg] To leave a message at another system station, dial a station, boss group or network
number, and listen for the confirmation tone.
[Cancel] To cancel the message and the flashing message lamp without calling back the message
sender.
[Number] To briefly display the number of the person who left a message.