Tadiran Telecom FlexSet 280S - Group Calls: Forced Release of a Participant; Group Calls: Forced Release of an Entire Group Call

Station Features 103 FlexSet 120S/280S User Guide
Group Calls: Forced Release of a Participant
Group Calls: Forced Release of a Participant
This feature allows an authorized user, from idle, to release a participant from an ongoing conference. The feature
does not allow the user to view the list of participants.
Releasing a single participant:
1. Press [GpCall] [PrtRel].
2. Listen for the dial tone.
3. Dial the participant number or press the programmed DSS key.
4. Press [FrcRls] - no confirmation tone will be heard.
5. Press [Exit] to exit.
Group Calls: Forced Release of an Entire Group Call
This feature allows an authorized user, from idle, to release the entire group call.
Releasing an entire Group Call:
1. Press [GpCall] [GrpRel].
2. Listen for the dial tone.
3. Dial the access code of the required Group Call.
4. Press [FrcRls] - no confirmation tone will be heard.
5. Press [Exit] to exit.