Tadiran Telecom FlexSet 280S - External: Upon Hearing Ringback Tone

Making External Calls 35 FlexSet 120S/280S User Guide
External: Upon Hearing Ringback Tone
External: Upon Hearing Ringback Tone
After dialing an external destination number, the following features appear on your FlexSet display when you hear
the ringback tone. Wait for an answer or press one of the soft keys to activate the required feature.
OUT trunk line
DIAL outside telephone number

Msg . Mute
A
utRdl Elp-Tm
OUT
trunk line
DIAL
outside telephone number

Msg . Mute
A
utRdl
[Msg.] Leave Message is used when dialing a network destination.
If no one answers your call, use this feature to leave a “message” at the called party’s station. This
feature lights the message lamp at the called party’s station indicating that a message was left, and a
simple message such as CALL SUSAN is left on the destination station’s keyset display. (page 116)
[Mute] Mute can be activated during ringback so that when the call is answered your side of the conversation is
muted and the called party will not hear you. A bullet appears next to the [Mute] key. The mute feature
deactivates the microphone for your speakerphone and handset or headset. Press the toggle key again to
restore microphone.
[AutRdl] Auto Redial is used to have the system automatically redial the unanswered destination. Further redial
options are available after activation. (See Redial on page 149)
1. Press [AutRdl]. The system will now automatically redial at timed intervals.
2. When the called party answers, press the flashing
SPKR or lift the handset to enable conversation.
[ElapTm] Elapsed Time - not used during ringback.
[CallWt] Calls Waiting is used to view the number of calls waiting for you. (page 51)
[FlshTk] Flash on Trunk is used to send a signal through the system to trunk lines in order to operate certain
types of features that are available on the second system. The second system is a telephone switching
center, PABX or another Coral system. This feature is also known as Calibrated Opening.
[Number] Number is used to briefly display the trunk dial number instead of the name.
[Park] Not used during ringback.