Tadiran Telecom FlexSet 280S - Call Log

Station Features 70 FlexSet 120S/280S User Guide
Call Log
Call Log
The Call Log feature allows you to view and redial the last 40 outgoing and last 40 incoming calls to your station.
Calls are displayed with the name and number (where available).
If the name is unavailable, just the number will be shown.
If the number is unavailable, the Call Log will display Unknown Number.
If the number is restricted, the Call Log will display Restricted Number.
If incoming calls are not answered, a message indicating the number of new calls is displayed on the FlexSet idle
screen: < xx New Calls >, where xx indicates the number of new calls. This count is reset to zero once the Call
Log is viewed, and is not shown again until there are new calls logged.
Call Log options can be maintained via the Tools feature, as described on page 162.
Press [CALLog] to access the Call Log options.
10:50 26 May 2004 site name
< 03 New Calls >

Msg CALLog Fwd DND Music
10:50 26 May 2004 site name
< 03 New Calls >

Msg CALLog Fwd
Page 1
Call Log
Out

In Esc
Call Log
Out

In Esc
Page 2
[Out] Outgoing Call Log is used to view the last 40 outgoing calls made from your station.
[In] Incoming Call Log is used to view the last 40 incoming calls made to your station.
A bullet appears next to the [Out] or [In] soft keys to indicate when outgoing or incoming calls are logged for your
station. If no calls are logged, pressing [Out] or [In] displays the < No Calls Made > or
< No Calls Received > message, respectively.