Tadiran Telecom FlexSet 280S - Wakeup

Station Features 180 FlexSet 120S/280S User Guide
Wakeup
Wakeup
Use this feature to program your FlexSet to ring at designated times. If you do not answer the call, the FlexSet will
ring 3 more times at 1-minute intervals. If you do not answer by the third call, the wakeup call is routed to the
attendant and a wakeup report is printed.
Press [WakeUp] to access the Wakeup options.
10:50 26 May 2004 site name
user name station number

AcctCd IDCtrl WakeUp aWake CnfIns
W
10:50 26 May 2004 site name
user name station

WakeUp aWake CnfIns
Page 1
WAKEUP 10:00am
New Next Cancel
WAKEUP 10:00am
New Next Cancel
Page 2
Entering first Wakeup request:
1. Press [WakeUp].
2. Enter the time you wish to be called at the ENTER TIME prompt
3. Choose [AM] or [PM].
Note that four digits are required for a 12-hr clock: (i.e. 0805 for 8:05).
NOTE: Should you hear the reorder tone, Wakeup is denied at your station (as defined by Class of Service). In
order to make use of this feature, request that the attendant activate Wakeup at your station.
• To add another Wakeup time, choose [New] and continue as above.
• To scroll through the Wakeup list, press [Next].
• To cancel the selected Wakeup time (displayed on the top line), choose [Cancel].
When Wakeup call rings:
When the FlexSet rings, the WAKE CALL NAME/NUM message appears on the top line indicating that this is a
Wakeup call. Press the
SPKR key to answer the call. Choose one of the following:
• Press [Snooze] to have the system recall you later; or
• Press
SPKR to cancel the reminder.