Making Internal Calls 29 FlexSet 120S/280S User Guide
Internal: Upon Hearing Busy Tone
Internal: Upon Hearing Busy Tone
After dialing an internal destination number, the following features appear on your display when you hear a busy
tone. Hang up or press one of the soft keys.
BUSY
called number or name
Msg.
CampOn
Brk-
In
SendCW
V-
Page
BUSY called number or name
Msg.
CampOn
Brk-In
[Msg.] Leave Message. Use this feature to leave a “message” at a busy station. This feature lights the message
waiting lamp at the busy station and leaves a simple message such as CALL SUSAN on the destination
station’s keyset display. (page 116)
[Msg-Wt] Message Waiting. The Attendant can use this feature to leave a message waiting indication at a busy or
idle station, room or group. (page 117)
[CampOn] Camp On, also known as Call Back. Use this feature to have the system automatically call you back
when the busy destination station is available. (page 74)
[Brk-In] Break-In enables an authorized user to break into an established two party call. Both conversing parties
will hear the Break In warning tone. Your voice will be heard after the warning tone stops. During
Break-In you can release the ports or alternate between parties. (page 32)
NOTE: Only stations with appropriate COS may activate the Break-In feature.
[SendCw] Send Call Waiting is used to send call waiting tone to the busy party. This feature is also known as
Call Waiting or Call Offer. The station now knows that another call is waiting. Your side hears a second
(quicker) ringback tone (system-wide defined).
[V-Page] Voice Page the called party’s keyset station using this feature. The other party receives a message that
they are being paged. Your voice is heard over the called party’s speakerphone after the warbling tone
stops. (page 132)
[Number] Number is used to briefly display the caller’s dial number instead of the name.
[Mute] Mute can be activated during busy tone so that if you break-in, your side of the conversation is muted
for silent monitoring (handset, headset and speakerphone). When this feature is activated by the [Mute]
To Next Page
Loading...
