Tadiran Telecom FlexSet 280S - COS Switchover

Station Features 80 FlexSet 120S/280S User Guide
COS Switchover
COS Switchover
Each station has a Primary and Secondary Class Of Service (COS), which provides the basis for dialing and feature
capabilities for a particular station. Use this feature to change your Class of Service from Primary to Secondary or
vice versa.
Press [COS-Sw] to access this feature.
10:50 26 May 2004 site name
user name station number

COS-Sw Setup Trace RoomSt BG:Fwd
10:50 26 May 2004 site name
user name station

Exec COS-Sw Setup
Page 1
2NDR COS CHANGE
ENTER PASSCODE
2NDR COS CHANGE
ENTER PASSCODE
Page 2
YOUR PRIMARY
COS IS: X
Primary Second
YOUR PRIMARY
COS IS: X
Primary Second
Page 3
1. Press [COS-Sw].
2. Dial your 4-digit Passcode. To define your passcode, see Setup: Passcode on page 156.
3. Press [Second] to switch to your secondary COS or [Primry] to return to your primary COS.
4. Listen for the confirmation tone.
NOTE: COS Switchover is denied when your phone is in Checkout mode.