Station Features 79 FlexSet 120S/280S User Guide
Conference Calls: Conference View/Release Calls:
Conference Calls: Conference View/Release Calls:
This feature allows an authorized user, from idle, to release a conference participant from an ongoing conference.
The feature also allows viewing the participant list.
Press [CnfIns] to access this feature.
10:50 26 May 2004 site name
user name station number
AcctCd IDCtrl WakeUp CnfIns GpCall
W
10:50 26 May 2004 site name
user name station
WakeUp CnfIns GpCall
Page 1
CONF. INSPECT
ENTER CONF NUM
* * * * * * * * * * Enter Destination * * * * * * * * * *
CONF. INSPECT
ENTER CONF NUM
* * * * * Enter Destination * * * * *
Page 2
RELEASE Participant Name
CONF Conference #
Parti#
Prev
Next
FrcRls Exit
RELEASE Participant Name
CONF Conference #
Parti# Prev
Next
Page 3
1. Press [CnfIns].
2. Dial the Conference number.
3. Choose [Parti#] and dial the participant number or use the [Next] and [Prev] to scroll between participants and choose
which one should be released.
4. Choose [FrcRls] to activate Forced Release for the participant displayed on the top line.
No confirmation tone will be heard.
5. If the Conference contains no participants, the display shows CONF EMPTY on the top line.
6. Press
SPKR key or [Exit] to exit.
NOTE: You may repeat this process for any number of participants.
To Next Page
Loading...
