Attendant Features 190 FlexSet 120S/280S User Guide
Attendant: WakeUp
Attendant: WakeUp
The attendant may program the system to call any room/station at a designated time.
If the user does not answer, recall will be attempted three times before the feature cancels, when defined system-
wide. If the recall is not answered, or busy, or the handset is not on the cradle, then the attendant will receive a call
with the NOT WOKEN message on the top line.
station or room #
NOT WOKEN
station or room #
NOT WOKEN
Should such a failure occur, it is recommended that the attendant provide an alternate means for waking the guest.
Printouts are possible for: new/cancel, fail, success. The printout type is defined system-wide.
Press [aWake] to access the Attendant WakeUp options.
10:50 26 May 2004 site name
user name station number
AcctCd IDCtrl WakeUp aWake CnfIns
W
10:50 26 May 2004 site name
user name station
WakeUp aWake CnfIns
Page 1
ttendant: WakeUp
Reques Report
ttendant: WakeUp
Reques Report
Page 2
To Next Page
Loading...
