Tadiran Telecom FlexSet 280S - Malicious Call Trace

Station Features 115 FlexSet 120S/280S User Guide
Malicious Call Trace
Malicious Call Trace
This feature records the next x (a system defined variable) calls to your FlexSet. A list of the calls can also be sent to
a printer or terminal.
Press [Trace] to access the Malicious Call Trace options.
10:50 26 May 2004 site name
user name station number

COS-Sw Setup Trace RoomSt BG:Fwd
10:50 26 May 2004 site name
user name station

Trace RoomSt BG:Fwd
Page 1
Malicious Call Trace

On/Off Print
Malicious Call Trace

On/Off Print
Page 2
[On/Off] Malicious Call Trace On/Off toggles the Malicious Call Trace on or off. If this feature is activated, a
bullet appears next to [On/Off], and next to [Trace] on the Idle screen.
NOTE: If there are insufficient system resources for the feature to be available at your station, the
message NO TRACE RECORD will be displayed.
[Print] Malicious Call Trace Print sends a list of the calls to a terminal or printer. The message
CALL TRACE PRINT appears. The listing is not deleted when printed; it may be printed later with
subsequent updates.
The details recorded are: originating number (for external calls: ANI if available or trunk number if not
available), your station number and the time of calls.
NOTE: Malicious Call Trace must previously be activated, or the message CALL TRACE OFF will
appear and the action will not be completed.