Station Features 181 FlexSet 120S/280S User Guide
Whisper Paging
Whisper Paging
This feature allows an authorized user to break into an ongoing call, without interfering with the call itself, by
whispering to one of the conversing parties. A Whisper Tone, in and out, is heard by the side whispered to.
The second party engaged in the original call hears neither tone, nor the whisper, and the whisperer cannot hear the
second conversing party. The party whispered to continues to hear the second party, and also hears the whisperer in
lowered volume. The party whispered to can reject the whisper page; alternatively, all whisper pages can be
automatically rejected by enabling Do Not Disturb Whisper Page - [Setup] [DND-WP]. (See Setup on page 156)
This feature can also be activated while in Silent Monitor and then the whisperer can be heard as well as hear the two
parties conversing.
Press [WhspPg] to Whisper Page a station.
10:50 26 May 2004 site name
user name station number
CampOn Park V-Page WhspPg SltMon
10:50 26 May 2004 site name
user name station
WhspPg SltMon AcctCd
Page 1
WHSPR PAGE
* * * * * * * * * * Enter Destination * * * * * * * * * *
WHSPR PAGE
* * * * * Enter Destination * * * * *
Page 2
Sending a Whisper Page:
1. Press [WhspPg].
2. Dial a station number.
3. Listen for the whisper tone.
4. Deliver the message and disconnect.
To Next Page
Loading...
