Tadiran Telecom FlexSet 280S - Do Not Disturb (DND)

Station Features 87 FlexSet 120S/280S User Guide
Do Not Disturb (DND)
Do Not Disturb (DND)
Use the Do Not Disturb feature to block all incoming calls to your station. When blocked, you can still receive Voice
Page calls and you are still able to make outgoing calls.
Any call forwarding to your telephone is automatically cancelled when you activate the DND feature. Only a station
that has DND Override privilege will be able to call your telephone.
When the feature is activated, the calling station will see the DONT DIST message (or UNATTENDED for Attendant)
and hear the reorder tone.
This feature is accessible via [DND] from idle or when receiving an incoming call.
10:50 26 May 2004 site name
user name station number

Msg CALLog Fwd DND Music
10:50 26 May 2004 site name
user name station

DND Music Redial
To activate, press the [DND] toggle key once. To cancel, press the [DND] toggle key again.
NOTE: Should you hear a reorder tone, DND is denied at your station (as defined by the Class of Service).
When the feature is activated, a bullet appears next to [DND] and a *DND* message shortly appears on the top line to
remind you that the feature is activated.
*DND*
user name station

Msg CALLog Fwd

DND Music
*DND*
user name station


DND Music Redial
Do Not Disturb Override
This feature can be applied to stations that are idle, but have been set to Do Not Disturb or Unattended. After dialing
a station and receiving a reorder tone, if the DONT DIST or UNATTENDED message appears on the top line, an
authorized user can override the DND using this feature and your call can be put through to the station.
1. Press [DNDOvr].
2. Listen for the ringback tone and wait for answer.