Tadiran Telecom FlexSet 280S - Attendant: Room Status

Attendant Features 189 FlexSet 120S/280S User Guide
Attendant: Room Status
Attendant: Room Status
Used to turn the Room Status definition of a station on or off.
There are 16 different Room Status definitions for each station. Contact your system administrator for their various
definitions. Then use the table on the following page to write in the various room statuses.
Press [aRmSts] to access the Room Status options.
10:50 26 May 2004 site name
user name station number

Setup Trace aTrace RoomSt aRmSts
10:50 26 May 2004 site name
user name station

aTrace RoomSt aRmSts
Page 1
A
ttendant: Room Status

RmSts0 RmSts1 RmSts2 RmSts3 RmSts4
A
ttendant: Room Status

RmSts0 RmSts1 RmSts2
Page 2
[RmStsx] Room Status x, where x = 0 to 15.
1. Choose the required [RmStsx] soft key.
2. Press [St/Rm#] and enter the station/room number, or scroll through the list using
.
3. Choose [Set] to activate, OR
Choose [Cancel] to deactivate or reset.
The status definition appears on the top line.
4. Press [Exit] or
SPKR to exit and save.
Name Name Name Name
RmSts0. RmSts4. RmSts8. RmSs12.
RmSts1. RmSts5. RmSts9. RmSs13.
RmSts2. RmSts6. RmSs10. RmSs14.
RmSts3. RmSts7. RmSs11. RmSs15.