Tadiran Telecom FlexSet 280S - Reminder

Station Features 153 FlexSet 120S/280S User Guide
Reminder
Reminder
Use this feature to set, review, or cancel reminders, which will ring your FlexSet at a designated time. You can set
reminders to ring your FlexSet at one or more designated times. If you do not answer the call, the FlexSet will ring 3
more times at 1 minute intervals. More than one reminder can be programmed.
Press [Remind] to access the Reminder menu.
10:50 26 May 2004 site name
user name station number

Redial Page_Q Hold Remind PickUp
10:50 26 May 2004 site name
user name station

Page_Q Hold Remind
Page 1
REMINDER 12:00PM
New
Next
Cancel
REMINDER 12:00PM
New Next Cancel
Page 2
Entering a Reminder request:
To enter a reminder request, press [Remind], enter the time you wish to be called at the ENTER TIME prompt, and
choose [AM] or [PM]. Note that four digits are required for a 12-hr clock: (i.e. 0805 for 8:05).
To add another reminder time, choose [New] and continue as above.
To scroll through the reminder list, press [Next].
To cancel the selected reminder time (displayed on the top line), choose [Cancel].
When Reminder call rings:
When the FlexSet rings, the REMIN CALL xxxx message appears on the top line indicating that this is a reminder
call. Press the
SPKR key to answer the call. Choose one of the following:
1. Press [Snooze] to have the system recall you later (after a system-defined time period).
2. Press
SPKR to cancel the reminder.