Station Features 166 FlexSet 120S/280S User Guide
Transfer (Xfer)
Transfer (Xfer)
You can transfer both internal and external calls to other users within your system or outside it. Transfer routes a call
you received to an idle station. It can also link a call you held to other ports.
When Auto transfer is defined at a station, dialing a number will automatically transfer that number, thus initial use
of the [Xfer] button or
XFER key is not necessary, although subsequent actions do require pressing [Xfer] (as defined in
this manual). This feature is typically utilized by attendants. Remaining procedures are the same as for a regular
transfer.
A call can be screened or unscreened.
Screened Transfer: You may announce the call before transferring.
Unscreened Transfer: You may transfer the call without a prior announcement. When the destination is busy,
hanging up will cause the system to camp on (external call only) to the busy station.
To Next Page
Loading...
