Tadiran Telecom FlexSet 280S - Attendant: Malicious Call Trace

Attendant Features 188 FlexSet 120S/280S User Guide
Attendant: Malicious Call Trace
Attendant: Malicious Call Trace
The Attendant may initiate this feature that records the next x (a system defined variable) calls to any station or room.
A list of the calls can also be sent to a printer or terminal.
Press [aTrace] to access the Attendant Malicious Call Trace options.
10:50 26 May 2004 site name
user name station number

Setup Trace aTrace RoomSt aRmSts
10:50 26 May 2004 site name
user name station

Trace aTrace RoomSt
Page 1
A
ttendant: Call Trace
On/Off Print
A
ttendant: Call Trace
On/Off Print
Page 2
[On/Off] Malicious Call Trace On/Off toggles the Malicious Call Trace on or off.
1. Press [On/Off].
NOTE: If the system resources are insufficient for the feature to be available, the message
NO TRACE RECORD appears.
2. Choose [St/Rm#] and dial a station/room number, or scroll through the list using
.
3. To start call trace, choose [Set].
To stop call trace, choose [Cancel].
[Print] Malicious Call Trace Print sends a list of the calls to a terminal or printer. Malicious Call Trace must
previously be activated (see On/Off above), or the message CALL TRACE OFF will appear and the
action will not be completed.
1. Press [Print].
2. Choose [St/Rm#] and dial a station/room number, or scroll through the list using [Next] and [Prev] only.
3. Choose [Set] to print. The message CALL TRACE PRINT appears.