During Idle 41 FlexSet 120S/280S User Guide
During Idle
The following telephony features appear on your FlexSet display during idle. Alternatively, they can be reached by
pressing
and choosing [Feat].
10:50 26 May 2002 site name
user name station
Msg CALLog Fwd DND Music
10:50 26 May 2002 site name
user name station
Msg CALLog Fwd
[Msg] Message is used to view, answer and delete messages, or to leave a message at another system station or
at a network number. (page 116)
[CALLog] Call Log allows you to view and redial the last 40 incoming and last 40 outgoing calls. (page 70)
[Fwd] Call Forward enables you to define the conditions under which incoming calls to your station are
forwarded to another destination. (page 66)
[DND] Do Not Disturb is used to block all incoming calls to your station.
(page 87)
[Music] Music enables you to activate or cancel background music through the speakerphone, and to choose
from one of four different music sources. (page 129)
[FlexiC] FlexiCall allows you to establish a telephone located outside the enterprise as your FlexSet’s double.
Use this feature to edit FlexiCall options. (page 89)
[Redial] Redial is used to redial the last dialed number, or a number that has been saved. (page 149)
[Page_Q] Page Queue retrieves a held Page Queue call. A Page Queue call can be picked up from any system
station. (page 130)
[Hold] Hold retrieves a call from hold. (page 106)
[Remind] Reminder is used to set, review, or cancel reminders, which will ring your FlexSet at a designated time.
More than one reminder can be programmed. (page 153)
[Pickup] Call Pickup enables you to pickup another ringing station in your system. (page 72)
[CampOn] Camp On, also known as Call Back. When a network station is busy or does not answer, you may
request that the system automatically call you back when the required destination number is available.
(page 75z)
To Next Page
Loading...
