Tadiran Telecom FlexSet 280S - Operating the Flexset

Operating the FlexSet 16 FlexSet 120S/280S User Guide
Operating the FlexSet
Operating the FlexSet is as simple as pressing a button. Operate the FlexSet using a combination of soft and fixed
keys. The FlexSet options appear in the FlexSet display at the lower line of the display, and automatically change to
reflect the current state of the telephone.
Three soft keys on FlexSet 120S and five soft keys on FlexSet 280S, located immediately below the FlexSet display,
allow you to enable the relevant options as they appear. The soft key options change every time the FlexSet status
changes.
Four system-defined keys are provided, the functions of which are system-wide programmable. Typical functions for
these keys are:
HOLD, XFER, LINE and SPKR.
FlexSet soft key functions can also be selected by pressing on the navigation keys. A press on the respective arrow,
moves the location of the cursor to the next function. To activate the required function, press
.
Use
to bring the FlexSet display to the beginning of the soft key options.
Press up/down keys
and
to scroll through lines of the soft key feature options. Press left/right keys
and to move from one option to the next on the displayed line.
A selected option is indicated by an arrow at its left (→ Music).
An activated option is indicated by a bullet at its left (• Music).
A selected and activated option is indicated by a bold arrow at its left (
Music
).