Tadiran Telecom FlexSet 280S - Making Internal Calls; Internal: Upon Hearing Ringback Tone

Making Internal Calls 27 FlexSet 120S/280S User Guide
Internal: Upon Hearing Ringback Tone
Making Internal Calls
Internal: Upon Hearing Ringback Tone
After dialing an internal destination number, the following features appear on your FlexSet display when you hear a
ringback tone. Wait for answer or press the nearby soft key to activate the required feature. See Using the FlexSet
Telephony Features on page 17 for more details.
INTERNAL called number or name

Msg
.
CampOn V-Page Mute Number
INTERNAL called number or name

Msg
.
CampOn V-Page
[Msg.] Leave Message. If no one answers your call, use this feature to leave a “message” at the called party’s
station. This feature lights the message waiting lamp at the called party’s station indicating that a
message was left, and it leaves a simple message such as CALL SUSAN on the destination station’s
keyset display. (See Messages: Options on page 116)
[Msg-Wt] Message Waiting. The Attendant can use this feature to leave a message waiting indication at a busy or
idle station, room or group. (page 117)
[CampOn] Camp On, also known as Call Back. When a station does not answer, you may request that the system
automatically call you back when the required destination number is available. (page 75)
[V-Page] Voice Page the called party’s keyset station using this feature. Your call is automatically answered and
your voice heard over the called party’s speakerphone. (page 132)
[Mute] Mute can be activated during ringback so that when the call is answered your side of the conversation is
muted and the called party will not hear you. When this feature is activated by the [Mute] on/off toggle
switch, a bullet appears. The mute feature deactivates the microphone for your speakerphone and
handset or headset. Press the toggle key again to restore microphone.
[Number] Number is used to briefly display the caller’s dial number instead of the name.