Station Features 136 FlexSet 120S/280S User Guide
Park
Retrieving a Parked Call:
From a different FlexSet:
1. Press [Park] at the second station.
2. Dial the station number at which the call was parked. If more than one party has been placed on Park, scroll
between names by using [Next], or by pressing the
button.
From the same FlexSet where the call was parked:
Press the flashing
LOOP, LINE, or DSS key.
OR
1. Press [Park].
2. Choose [ReConn]. If more than one party has been placed on Park, scroll between names by using [Next], or by
pressing the
button.
3. Enter the activate code (default - #1).
If the parked call is not picked up within a predetermined time (system-defined timeout), the call will automatically
return to the originating station from which the park was made.
NOTE: More than one call can be parked at a single station, but calls are retrieved on a first-in, first-out basis
(FIFO). That is, the first parked call (first-in) will be the first call that is picked up (first-out). However, if
multi-parking is required it is recommended that the Page Queue feature be used instead (see page 130).
To Next Page
Loading...
