Station Features 109 FlexSet 120S/280S User Guide
Individual Remote System Services (IRSS) - Freedom
To place a call from IRSS phone that does not provide Caller ID:
This applies for IRSS calls from off-site phones that do not possess a Caller ID number and, therefore, cannot be
identified by the Coral.
NOTE: Some telephones may be denied the Executive Privilege feature (defined by Class Of Service).
In order to use Executive Privilege your station must be defined with a passcode.
1. Place a call to the Executive Privilege number (contact your system administrator for that number).
2. Listen for the dial tone.
3. Dial your own Coral station number.
4. Dial your 4 digit passcode. Listen for the distinctive dial tone.
5. Dial the required destination number.
Possible destinations can be: external number (stationary or cellular), network number, or a Coral destination,
including station, trunk/trunk group, dial service, routing access, public/private library, voice mail.
NOTE: If your destination is an external number, it should be preceded by an external line access code.
• If your destination is voice mail (IVR access code), skip to page 112.
• If your destination is a FlexiCall All feature, skip to page 113.
• To enable another IRSS phone, skip to page 114.
6. Listen for the ringback tone.
7. Wait for an answer.
8. You can activate any of the options described in the table on page 110.
To Next Page
Loading...
