Station Features 140 FlexSet 120S/280S User Guide
Private Library
[Codes] [DspOn] Display On. Enables the display of the Library contents on the FlexSet. Also used for Call
Accounting System.
[Codes] [WaitDT] Wait for Dial Tone. Asks the system to wait for Dial Tone before dialing the digits.
[Codes] [Dsp -] Display Dash (–). Displays a dash (–) within the dialing number on the FlexSet.
[Codes] [FlshTk] Flash Trunk. Sends a Calibrated Opening (Flash) over a trunk line (display shows hf).
[Codes] [Dial *] Dial Asterisk (*). Dials an asterisk (*) as part of the dialing number.
[Codes] [Dial #] Dial Pound/Hash (#). Dials a pound sign (#) as part of the dialing number.
Deleting a single number from memory:
1. Press [PrvLib].
2. Choose [Lib#] and dial the library number to be removed, or scroll through the list of private library numbers using
[Next] and [Prev] or the
and keys.
3. Choose [Cancel].
4. Press
SPKR to exit.
NOTE: The number of digits that can be programmed, including dial codes, is limited by the system (defined
system-wide). Should you try entering a longer digit string than allowed, the system will give the error
message LENGTH EXCEEDED, and programming will stop.
To Next Page
Loading...
