Station Features 150 FlexSet 120S/280S User Guide
Redial
Activating Auto Redial from idle (before making an external call):
1. Press [AutRdl].
2. Dial the required outside line access code or press the relevant preprogrammed outside line key.
Possible outside line access codes are trunk number, trunk group number, routing access, dial
service, private/public library number, last number redial code, or saved number code.
3. Dial the outside number.
4. Press [Enable].
The number will now automatically redial at timed intervals. When the called party answers, press
the flashing
SPKR key or lift the handset to enable conversation.
Once Auto Redial has been activated, the following options appear in idle state after pressing [AutRdl].
The features in the following table affect all numbers in the redial list.
To Press Display Message
Feature
Key LED
Comments
Cancel
[CanAll]
AUTO REDIAL /
LIST EMPTY
Off
Deletes all numbers in the redial
list. A confirmation tone is heard.
Freeze
[FrzAll]
HOLD SET
Winking
Ceases all automatic dialing.
Confirmation tone is heard.
Restart (release
from freeze)
[RstAll] /
SPKR
HOLD REMOVED
On
Re-enables dialing of the
"Frozen" numbers.
Add
[Add]
On
Adds another external number to
the redial list
To Next Page
Loading...
