Station Features 168 FlexSet 120S/280S User Guide
Transfer (Xfer)
Disconnect to automatically transfer the call (unscreened transfer).
If the 3rd party is busy or not answered, the call will return to you with the relevant NO ANSWER or BUSY
message.
NANS station unanswered # original caller #
NO ANSWER station unanswered #
DND Mute FwdAll Number
NANS unanswered # original #
NO ANSWER unanswered #
DND FwdAll Number
Station Does Not Answer
SBSY busy station # original caller #
BUSY busy station #
DND Mute FwdAll Number
SBSY
busy # original #
BUSY
busy #
DND Mute FwdAll
Station is Busy
Answer the return call, then either:
• Ask the calling party if they wish to transfer to another party;
• Hang up;
• Press [CampOn] to automatically camp on to the station from which the call was transferred.
Transferring a held call:
Use transfer of a held call to connect an incoming call to the held party, such as when you have to locate someone for
a caller.
1. While the party is being held, dial a destination number.
2. Press [Xfer] or the
XFER fixed key.
3. Press the winking DSS key associated with the held call.
4. Press
SPKR or hang up to transfer the call.
To Next Page
Loading...
