Appendix A – Glossary A-5 FlexSet 120S/280S User Guide
Transfer/ Xfer
While engaged on a call you can initiate a feature by pressing the XFER (Transfer)
key. XFER provides you with a distinctive dial tone, which enables you to either
transfer the call, or activate a feature. XFER puts the second party on Hold and
provides one of the following: music, reorder tone, busy tone or no sound at all, as
defined system-wide. If your Coral system is connected to another PABX you may
have to use the FLASH key instead of the XFER key. The XFER key is used for
local Coral system features, while the FLASH key is used to flash on trunks. In
some systems, if you are not connected to a DTMF destination, transfer can be
carried out by dialing ‘1’ instead of pressing the XFER key. In some systems
transfer is applied automatically when you dial a number. (See also Auto Transfer)
Trunk
An outside line from the telephone company that terminates at the customer’s
location.
Trunk Group
A number of trunks linked together (members) for a common outgoing function.
Trunk Number
The access code number that is dialed or keyed by station user in order to gain
access to a specific outside line.
Turret
A single telephone position comprised of two soft-connected FlexSets, each having
up to three FlexSet 40B expansion modules attached. The combination of two
FlexSets provides the ability to attach up to 240 buttons to the complex giving a
total of 262 programmable buttons.
Verified Forced Account
Code (VFAC)
A feature that forces the station user to dial a secret authorization account code
before accessing an outside line. Before dialing is allowed, VFAC verifies the
presence of the account code. If the code is not present, dialing is blocked. When
the code is found, dialing is allowed. Except for verification, VFAC is the same as
Forced Account Code.
To Next Page
Loading...
