Making External Calls 39 FlexSet 120S/280S User Guide
External: During a Call
[CallWt] Calls Waiting is used to view the number of calls waiting for you during a conversation.
[FlshTk] Flash on Trunk is used to send a signal through the system to trunk lines in order to operate certain
types of features that are available on the second system. The second system is a telephone switching
center, PABX or another Coral system. This feature is also known as Calibrated Opening.
[Number] Number is used to briefly display the trunk dial number instead of the name.
[OCC] OCC is used for users with pulse trunks and/or when your FlexSet is defined with Auto Transfer. This
feature enables you to send touch-tone dialing (DTMF tones) over a trunk for applications or services
(such as Voice Mail) requiring DTMF tones.
1. During an external call, press [OCC].
2. Dial the required digits.
[Series] Series is used to mark an external call before transferring it to a third party. This causes the call to
return to you after the third party hangs up. This feature can only be used during conversation.
1. During conversation, press [Series] to mark the call.
2. Listen for the confirmation tone.
3. Transfer the call when you are ready.
[AcctCd] Account Code is used to enter an account code for the current external call. The code is marked on the
SMDR printout. (page 49)
[Privac] Privacy puts your FlexSet into Privacy mode. This prevents other members of your Boss Group from
accidentally joining your conversations.
[ExHold] Exclusive Hold puts your FlexSet into Exclusive Hold mode. This ensures that a call placed on hold
can be retrieved only at your station. If Exclusive Hold is cancelled, the call put on hold can be retrieved
by any other member of your Boss Group.
To Next Page
Loading...
