Why doesn't the key lock function activate on Terumo Medical Equipment?
If the key lock function does not activate, it could be because an alarm other than the On Battery Alarm is issued. Resolve the cause of the alarm. Also, the key lock function does not activate while log data is being exported.
Why doesn't the count-down ended sound play on Terumo Medical Equipment?
If the count-down ended sound does not sound, it is because an alarm is issued. The alarm sound has priority over the count-down ended sound.
How to fix 'Failed to output the log to the USB' error on Terumo Medical Equipment?
If “Failed to output the log to the USB.” is displayed, it means the USB memory drive cannot be written. Enable the USB memory drive writable, and try to export the data again.
General| Product Name | Terumo CAPIOX EBS Circuit with X coating |
|---|---|
| Category | Medical Equipment |
| Manufacturer | Terumo |
| Coating Type | X coating |
| Usage | Extracorporeal circulation during cardiopulmonary bypass |
| Type | Extracorporeal Blood Circuit |
| Compatibility | Compatible with Terumo CAPIOX oxygenators |
Details the physical layout and components of the CAPIOX EBS.
Provides critical safety guidelines for operating the CAPIOX EBS system.
Outlines proper storage conditions to maintain device integrity.
Step-by-step guide for setting up the CAPIOX EBS system.
Detailed steps for priming the CAPIOX EBS circuit before use.
Instructions for connecting the CAPIOX EBS to the patient circuit.
Procedure for initiating the bypass function of the CAPIOX EBS.
Guidelines for operating the CAPIOX EBS during perfusion.
Steps for safely terminating the bypass procedure.
Procedure for replacing the CAPIOX EBS circuit.
Technical data and specifications for the CAPIOX EBS.
Introduction to the CAPIOX Centrifugal Pump Controller SP-200.
Highlights key features of the CAPIOX Centrifugal Pump Controller SP-200.
Illustrates the system setup with the controller and connected components.
Describes the front, control panel, rear, and bottom views of the controller.
Explains coast speed behavior and LCD touch panel displays.
Details controller display units, optional accessories, and related components.
Covers broad safety guidelines for system operation and handling.
Details safety advice for specific components like the controller and sensors.
Addresses electrical safety, environmental factors, and electromagnetic interference.
Provides guidelines for proper storage and cleaning procedures.
Specific precautions for installing and using the system in an ambulance.
Guide for initial system setup and touch panel interaction.
Steps for preparing the system and attaching the controller to the cart.
Instructions for connecting AC power, drive motor, sensors, and cables.
Details inspections required before circulation and how to start it.
Procedures for connecting the centrifugal pump and attaching components.
Steps for connecting temperature/pressure sensors and filling with priming solution.
Covers powering on the system, confirming setup, auto-priming, and calibration.
Instructions for attaching, using the attachment, and using the arm of the Fast Clamp.
Guidelines for operation during circulation and the weaning process.
Procedure for safely shutting down the system.
Details on assembling the cart, locking casters, and moving the unit.
Instructions for attaching accessories like gas blenders and oxygen cylinders.
Explains the two setup modes: User and Admin.
Configuration of flow and pressure alarm thresholds.
Setup for pressure and temperature measuring functions and alerts.
Configuration of fast clamp and air bubble detector functions.
Setting safety responses and reviewing alarm configurations.
Setup for Body Surface Area calculation, timers, and history tracking.
Procedures for exporting data via USB and managing logs.
Accessing and managing admin setup and passwords.
Details settings for presets, auto-priming, coast speed, and communication.
Technical specifications for the CAPIOX Centrifugal Pump Controller SP-200.
Details alarms, available functions, and environmental/power conditions.
Physical dimensions, weight, and list of related components.
Guidance on electromagnetic compatibility and emissions.
Guidance on electromagnetic immunity for the system.
To Next Page
