Tettex 2293 - Tap Changer Connection Cable; Extension Cables

Accessories & Spares
179
21.4 Tap changer connection cable
This remote control tap changer operation cable
can be used to connect automated tap changers
to support the fully automated measurement
mode.
21.5 Extension cables
This cable is used to enlarge the connection
cables by 10m for very large DUTs or longer
distances between the 2293 instrument and
DUT.
There are two versions:
Connectors bolted (Serial No. Lower than
179584)
Connectors twist lock (Used with devices Serial
No. higher than 179585)